Filter
Top Products
FileServ Version 4.3—600726 Rev A Page 7 of 22
www.adic.com
Update sysparm File with Media Capacity
After an initial installation, if you add or change a Sony AIT-2, IBM 3590E1A, Quantum DLT 7000, or
Quantum DLT 8000 drive type, update the system parameters to reflect the new media capacity by
following the steps below:
Step 1. Log in as
root.
Step 2. Edit the fs_sysparms file.
Step 3. If you are adding an AIT-2 drive, update the DEF_MED_SPC_AIT parameter definition to be as
shown below if you are using 170m tape:
Step 4. If you are adding an AIT-2 drive, update the DEF_MED_SPC_AIT parameter definition to be as
shown below if you are using 230m tape:
If you are adding an 3590E1A drive, update the
DEF_MED_SPC_3590 parameter definition to
be as shown below:
If you are adding a DLT 7000 drive, update the
DEF_MED_SPC_CTIV parameter definition to be
as shown below:
If you are adding a DLT 8000 drive, update the
DEF_MED_SPC_CTIV parameter definition to be
as shown below:
Step 5. Save the changes and quit the edit session.
Modify IRIX Kernel for SONY DTF-2 Drive
IRIX only: Update the SGI kernel to be aware of the SONY DTF-2 drive, by following the steps below:
Step 1. Log in as root.
# vi /$FS_HOME/sysparms/fs_sysparms
DEF_MED_SPC_AIT=35000000000;
DEF_MED_SPC_AIT=50000000000;
DEF_MED_SPC_3590=20000000000;
DEF_MED_SPC_CTIV=35000000000;
DEF_MED_SPC_CTIV=40000000000;
# su root