Operating Instructions
27
Cleaning and Care
Hob
3
Clean the hob and the cast hotplates after each use, when they are still
warm to the touch or cold. By this means you will avoid spills becoming
burnt on.
Decorative Lid
You can remove the decorative lid to clean the hob.
0 1. Open the decorative lid fully so that it is vertical.
2. Remove the cross-head screws on the right and left.
3. To replace, fit the decorative lid such that it is vertical and fix in place
with the two cross-head screws.
1
Caution: Only close the decorative lid when the rings have cooled
completely! There is a risk of burns!
Cast Hotplate
0 1. Remove heavy soiling with fine scouring sand or a scouring pad.
2. Wipe away residues with a damp cloth.
3. Then warm the hotplate a little and leave to dry.
4. To maintain the cast hotplate in good condition, occasionally rub a lit-
tle sewing machine oil into it and then polish with absorbent paper.
(Do not use butter, bacon fat or similar substances for this purpose!)
1
Important: Do not use scouring sand or a scouring pad to clean the
stainless steel surround on the hob because these cause scratches!
3
General information
• After cleaning, heat the hotplates briefly to dry them.
• Do not place moist or wet items on the hotplates.
• Rub utensils dry before placing them on the hotplates.
• Due to the thermal load during cooking, the stainless steel surround
on the hob may discolour slightly. This is due to physical reasons.