AEG FM 4803K-AN Cooktop User Manual


 
8
Ceramic glass is insensitive to tem-
perature shock and very robust:
however it is not unbreakable.
Especially sharp and hard
objects that fall on the cooking sur-
face can damage it.
Ceramic hob
Induction
When you switch on a zone, a high-
frequency magnetic field is formed
between the induction coil and the
magnetic base of the pan. This mag-
netic field contains induction cur-
rents. The base of the pan slows
down the induction currents, thus
forming heat which first heats the
pan base and then the food in the
pan.
Magnetic field
Ceramic surface
Induction coil
Saucepan base
Quicker cooking
With induction, your pans become
hot immediately. This means you
save time and energy when cooking
by induction. As the necessary heat
for cooking the food is formed in the
base of the pan, the hob hardly gets
hot. However, it does absorb the sur-
plus heat from the pan base.
37
Problems
The zones won’t turn on. The dis-
play shows:
The zones won’t turn on and the
display shows:
The display is flashing “F”.
If the rear zone is set to levels 8
or 9 while the front zone is set to
Power, the front zone will revert
to level 9.
Remedy
Child safety has been activated. You
can either press the
j
button at the
same time as you make a selection, or
you can cancel the child safety device,
see Section “How to use .. Child safety”.
Autostop has been activated. Touch the
k
button. The hob is now ready for
use.
Check whether the zones are suffi-
ciently covered by the pan. See the
section “How to use...Suitable pans”
Check that the pans are suitable for
induction. See the section: “How to
use...Suitable pans” If “F” still flash-
es, contact service. See section
“Service and spare parts”.
The front and rear zones are connect-
ed. If you wish to use setting 8 or 9
on the rear zone, the front zone cannot
be set higher than level 9. Power will
automatically be turned off.
In-guarantee customers should ensure that the above checks have been made as
the engineer will make a charge if the fault is not a mechanical or electrical
breakdown.
Please note that it will be necessary to provide proof of purchase for any in-guar-
antee service calls.