Filter
Top Products
6
Before operation
Setting the clock
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP button the display will show:
To set the clock, see below.
Using the Stop button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
x1
Example: To set the 24 hour clock to 23:35
Choose the 24 hour
clock.
1. Choose the clock
function. (12 hour
clock)
2. Set the hours. Rotate the
TIMER/WEIGHT/PORTION
knob until the correct hour is
displayed (23).
Check the display.
4. Set the minutes. Rotate the TIMER/
WEIGHT/PORTION knob until the
correct minute is displayed. (35).
5. Press the MICROWAVE
POWER LEVEL button to
start the clock.
NOTE:
1. You can rotate the TIMER/WEIGHT/PORTION knob
clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake during
programming.
3. If the electrical power supply to your microwave
oven is interrupted, the display will intermittently
show after the power is reinstated.
If this occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the MICROWAVE POWER LEVEL button down
for 3 seconds. will appear in the display.
2. To set the 24 hour clock, press the MICROWAVE POWER LEVEL button once
more after Step 1, in the example below will appear in the display.
x1 and hold for
3 secs.
To set the clock, follow the example below.
3. Press the MICROWAVE
POWER LEVEL button
to change from hours
to minutes.
x1 and hold
for 3 secs.
x1
x1
x1
1. AG-31+32D-EU English 09/11/2005 09:02 Page 6