Alto-Shaam 1000 SERIES Oven User Manual


 
SECTION 2 OPERATION
7.
OV EN C O MPART M EN T C ON TRO L PA N EL I D EN T IF IC AT IO N
1. Press oven POWER SWITCH ´ ON.”
POWER ON INDICATOR SWITCH will illuminate and will remain lit as long as the power switch
is in the ON position.
2. Set HOLD thermostat · to required holding temperature.
HOLDING INDICATOR LIGHT will illuminate as the holding thermostat calls for heat.
This process will continue as long as the Power Switch is in the ON position and holding
thermostat is activated.
3. Set COOK thermostat » to required cooking temperature.
4. Activate the COOK thermostat to preheat the oven by turning the COOKING timer ¿ clockwise.
COOKING INDICATOR LIGHT and the HOLDING INDICATOR LIGHT will alternately illuminate
as each thermostat calls for heat. This process will continue until the cooking timer cycles or is
turned to the OFF position.
I
o
I
o
OPERATION
TEMPERATURE GAUGE ³ will indicate the
air temperature inside the oven compartment.
HOLDING INDICATOR LIGHT COOKING INDICATOR LIGHT POWER ON INDICATOR SWITCH
HOLD THERMOSTAT
COOK THERMOSTAT
COOKING TIMER