Filter
Top Products
COMBITOUCH
®
ESG SERIES • GAS INSTALLATION MANUAL • MN-29246 • 25.
INSTALLATION
GREASE COLLECTION HOOK-UP
( i f e Q u i p p e D w i t h t h i s f e a t u R e )
• Grease Collection Hose Assembly is
attached to the oven in the back.
• Place Grease Collection Containers
inside the tray of the Mobile Grease
Collection Cart. Roll into place next to
the oven.
• Loosen vent cap on container. Pull out
the Grease Collection Hose Assembly
from the back of the unit. Remove
collection container fill cap.
• Screw Grease Collection Hose
Assembly on to collection container
until snug.
• Turn ball valve handle to the ON
position.
• Automatic Grease Collection System
is electronically activated during
the chicken cooking process [
patent
pending
]. It is designed to save labor
and provide greater employee safety
by eliminating the need to handle hot
grease in shallow pans.
On/O
Ball Valve
Grease Collection Hose
5014542
22-3/16" (563mm)
3-3/8" (86mm)
20-1/4" (514mm)
37" (940mm)
33-1/4" (845mm)
28-1/2" (724mm)
10-1/2" (267mm)
11-3/16" (284mm)
Container
Fill Cap
Optional
Mobile
Grease
Collection
Cart
Grease
Collection
Container
Vent Cap
• Grease Collection container has
a 5 gallon capacity and holds
approximately 3 full loads of
poultry grease.
• It is suggested to change the
container when material reaches the
fill line on the bottle or at 4 gallons
to avoid hot grease overflow.
• Turn the ball valve handle to the
OFF position.
• The ball valve handle must be in the
OFF position when changing the
collection container.
• Unscrew the container fill cap.
• Using a new container, screw Grease
Collection Hose Assembly on to
collection container until snug.
• Turn ball valve handle to the ON
position.
Recommended
Capacity
Note: When grease collection is not in use, turn
the ball valve handle to the OFF position
to avoid the possiblity of water siphoning
into the container.