Alto-Shaam ASF-60E Fryer User Manual


  Open as PDF
of 70
 
Electric Fryer Operation & Care Manual • 24
DELUXE CONTROL OPERATION
Electric Fryer Operation & Care Manual • 24
DELUXE CONTROL OPERATION
PROGRAMMED PRODUCT KEY OPERATION
1. TURN THE POWER SWITCH LOCATED BEHIND THE LOWER FRONT ACCESS DOOR TO THE “ON”
POSITION.
Press the HI-LIMIT RESET button.
The HI-LIMIT ALARM light will go out.
Both LED displays on the control panel will indicate OFF.
2. Press and hold the ON/OFF key for 1-1/2 to 2 seconds to energize the fryer.
The indicator light within the display will illuminate to signify that the control is cycling the heaters to
reach the set-point.
The following will appear in the alpha/numeric display:
“MELTCYC” The fryer will start the melt-cycle mode. This is the required mode necessary for
melting solid shortening within the frypot. The fryer will generate ON/OFF heating
cyclesandwillremaininthismodeuntil180°F(82°C)isreachedorthemodeis
manually bypassed.
FOR USE WITH LIQUID SHORTENING, PRESS THE TEMPERATURE KEY FOR
4 SECONDS TO BYPASS THE MELT CYCLE.
“PREHEAT”
Preheat will appear in the display and the fryer will generate a continuous heating
cycle until it reaches the operator pre-programmed set-point or a default temperature of
350°F(177°C).
“READY”
Whenthefrypottemperatureisreached,“READY,” will appear in the Alpha/Numeric
Display.
3. LOAD PRODUCT Loadproductinbasket(s)andsetbasket(s)inthefryerliftbrackets.Thebasket(s)will
automatically lower into the oil after the product key is pressed.
4. Press and hold the desired PROGRAMMED PRODUCT KEY for 1 second.
The indicator light for the selected product key will illuminate.
Thebasketlift(
on lift equipped fryers only)willlowertheproductintothecooking
oil/shortening. The display will indicate the product name and the programmed cook
time. The control will begin a countdown of the time.
continued
75°F
Melt-Cyc
3:50°F
Fries
275°F
Preheat
350°F
Ready
 previous next