Alto-Shaam ASF-60E Fryer User Manual


  Open as PDF
of 70
 
Electric Fryer Operation & Care Manual • 25
DELUXE CONTROL OPERATION
Electric Fryer Operation & Care Manual • 25
DELUXE CONTROL OPERATION
PROGRAMMED PRODUCT KEY OPERATION
5. If shake-time has been programmed into the selected product:
“SHAKE”
Analarmwillsoundduringthecookingcycleatthespeciedshake-timeprogrammed.
“SHAKE” will appear in the display. The basket will automatically lift
50-percent and the display will count down from the shake time programmed.
After shaking the product, both the alarm and display can be cleared by
pressing the selected product key. The basket will automatically lower into the
cooking position and the cooking time will resume.
NOTE: This function will not occur if shake time has not been programmed
into the selected product.
6. At the end of the cooking cycle…
“Done”
Thebasket(s)willlift(on lift equipped fryers only).
An alarm will sound.
The indicator light within the display will begin to flash.
If the control is set to “Continuous Alarm Mode,” press the illuminated
product key to silence alarm. If not set to “Continuous Alarm Mode,” the
alarm will stop in 5 seconds without user intervention and the display will
reverttothe350°F(177°C)“READY” state if a hold value has not been
programmed.
7.
“Hold Done”
If a hold value has been entered into the cooking program, the control alarm
will sound and the basket will automatically lift. The hold time will be
displayedandcountdownwillbegin.Whentheholdtimerreaches0,analarm
will sound and the product indicator light within the display will flash.
Cancel the alarm by pressing the product key.
NOTE: If no hold value has been programmed, the control will skip to item 8.
8.
“READY”
The control will revert to the ready state.
“READY,” will appear in the Alpha/Numeric Display.
The4-digitdisplaywillindicatetheoperatorsettemperature
orthedefaultset-pointof350°F(177°C).
3:50°F
Done
0:30°F
Hold Done
0:10
˚
-
Shake
3:50°F
Ready
 previous next