Filter
Top Products
10
Using the Oven Control
Flashing Display
When power is connected or
interrupted, oven display flashes.
Press CLOCK to clear display.
Clock may need to be reset.
Making the Numbers
Increase at a Faster
Rate
Time increases in larger increments
the longer
+
or pad is held.
Setting Electronic Clock
The 12 hour clock does not display AM, PM or military time. When power is
connected or restored, display flashes until pad is
pressed or temperature knob is turned.
1. Press CLOCK pad.
• TIME displays in lower left corner
2. Press
+
or pad until correct time-of-day
displays.
3. Press CLOCK pad to set time.
• If CLOCK pad is not pressed, approximately
60 seconds after last entry, TIME
disappears and clock is set.
Setting Minute Timer
The timer is a timer only. Electronic timer does not control bake, broil, or
self-clean function. Timer can be set from 5 seconds to 9 hours and 50
minutes.
1. Press TIMER pad.
• TIMER displays
2. Press
+
or pad until desired amount of
time displays.
• Timer begins counting down
automatically after time is entered.
3. Press and hold TIMER pad to cancel timer
signal.
• After time elapses, timer beeps 3 times
then approximately once every 6 to 8
seconds until TIMER pad is pressed.
Resetting and Canceling Timer
To reset the time when remaining time is displayed, press
TIMER pad,
then
+
or pad until new time displays. To cancel timer when remaining
time is displayed or when signal is beeping, press TIMER pad and hold for
approximately 5 seconds. Pressing OVEN CANCEL pad to silence timer
will also cancel oven operation.
OVEN
LIGHT
TIMER
ON/OFF
CLOCK
STOP
TIME
COOK
TIME
OVEN
CANCEL
CLEAN BROIL
BAKE
CLEAN
BROIL
LOCK
DELAY
OVEN ON
CLEAN
STOP
TIMER
BAKE
888
HR
O
N
CLOCK
TIMER
Timer Signal
When time elapses, timer
beeps 3 times then
approximately once every 6-8
seconds until TIMER ON/OFF
pad is pressed.
End-of-Cycle Signal
When a timed cooking cycle is
complete, three long signals
sound. End of cycle signal
continues to sound until OVEN
CANCEL pad is pushed or for 5
minutes.