Filter
Top Products
13
How Long Should the Self-
Clean Cycle Last?
The Self-Clean cycle can be set from 2
to 4 hours. Minimum recommended
cleaning time is 3 hours. After the Self-
Clean cycle ends, the oven must cool
before the oven door can be opened.
When the LOCKED light no longer
glows in the display, you can safely
open the oven door. DO NOT force the
oven door open while the LOCKED
light shows in the display. The oven
door lock can be damaged.
Do I need to prepare?
To get the best results from the self-
clean cycle, follow these steps:
• Remove birds or animals
susceptible to smoke or other
fumes from the room or
adjoining room.
• Make sure oven light cover is
properly in place. Do not use
cleaning cycle if it is not.
• Remove oven racks and all cooking
utensils from oven.
• Clean excess spills from oven
interior.
• Remove items from range top and
backguard. These areas can become
hot during self-cleaning cycle.
Self-cleaning
Self-clean feature uses high oven temperature to clean oven interior.
1. Prepare oven for self-cleaning (see below
right).
2. Press CLEAN pad.
• CLEAN, TIME and — — — — display.
3. Press
or pad to adjust cleaning time.
• 3:00 displays when arrows are first pressed.
• Oven begins to clean. CLEAN, TIME, and
O
N
display during cycle. LOCK flashes in
display when automatic door latch is locking.
• LOCK is displayed during Self Clean cycle while door is locked.
• When oven has cooled to a safe temperature, the LOCK light
flashes while the door latch opens. When oven has cooled
enough to open, the LOCK light no longer displays and door
can be opened. No signal sounds at end of self clean cycle.
WARNING
!
To avoid risk of personal injury,
do not touch oven vents or area
around vents during self-
cleaning. These areas can
become hot enough to cause
burns.
CAUTION
!
To avoid fire or smoke damage,
remove any flammable materials
from storage drawer. Items like
plastic containers and paper
manuals can melt or burn.
CAUTION
!
To avoid risk of fire or smoke
damage, clean excess spills
before starting Self Clean.
Interrupt Self-
Clean Cycle
1. Press OVEN CANCEL pad.
2. When oven has cooled to a
safe temperature, door will
unlock and can be opened. DO
NOT force door. This can
cause damage to the latch.
Delayed Self-clean Cycle
Set oven to begin and end cleaning at later time Oven control
calculates starting time.
1. Prepare oven for self-cleaning (see right).
2. Press CLEAN pad.
• CLEAN, TIME and — — — — display.
3. Press
or pad until desired amount of
cleaning time is displayed.
4. Press STOP TIME pad.
5. Press
or pad until desired stopping time
appears in display.
• Starting time is automatically calculated based
on amount of cleaning time and stop time.
CLEAN, TIME, and
O
N
display during cycle.
• LOCK flashes in display when automatic door
latch is locking.
• The oven begins the Self-Clean cycle.
• LOCK is displayed during Self Clean cycle.
• When oven has cooled to a safe temperature, the LOCK light
flashes while the door latch opens. When oven has cooled
enough to open, the LOCK light no longer displays and door can
be opened. No signal sounds at end of self clean cycle.
CLEAN
STOP
TIME
CLEAN
Using the Oven Control (cont'd)