Filter
Top Products
10
Dual Radiant Element
Dual Element can be operated using inner element only
or both elements.
To use inner element
1. Depress
Element Size
switch downward. Dual
Element switch is located in upper right corner of
control panel. (Figure 8)
LARGE
SMALL
Figure 8
2. Push in and turn surface element control to desired
setting. (Figure 9)
• Element will cycle on and off to maintain desired
heat setting.
OFF
LO
HI
MED
OFF
LO
HI
MED
Surface element control knobs
Figure 9
3. When finished cooking turn control to
OFF
position.
To use both inner and outer element
1. Depress
Element Size
switch upward. (Figure 10)
LARGE
SMALL
Figure 10
2. Follow steps 2-3 above.
Halogen Element (ARH6710)
Halogen element is able to provide constant non cycling
power.
LO
setting allows excellent simmer and keep
warm capabilities.
1. Push in and turn control knob to the desired setting.
(Figure 11)
• LO through 3 should be used for food that is
prepared at less than boiling temperatures or to
simmer. When using settings LO through 3 the
element will not be illuminated.
• 4 through 5 can be used to maintain boiling in
moderate amounts of liquid.
• 6 through 7 should be used to maintain boiling or
larger amounts of food, low temperature frying and
to maintain correct pressure in a pressure cooker.
• 7 through 9 can be used to fry meat and poultry or
to maintain deep-fat frying temperatures.
• HI should be used to bring food to boiling
temperatures. When food is boiling temperature
should be reduced to 4,5,6,7.
OFF
HI
LO
2
3
4
5
6
7
8
9
Figure 11
2. When finished cooking, turn control to
OFF
position.