Filter
Top Products
16
Changing Preprogrammed Food Pads
Preprogrammed food pads cook specified amounts
of food to serving temperature (see page 10). To
reprogram pads:
1. Press STOP/RESET to clear display.
2. Press MEMORY SET. "P" displays.
3. Press pad number 0-9 to change. Current
heating time, Cookmatic
®
level, and "MICRO"
display.
4. Press TIME ENTRY. "0" displays.
5. Enter new heating time. New time appears in
display.
Note: When reprogramming one of the
multiple program pads (MINIMEAL, SOUP,
POTATO, or HOT DRINK) enter cooking time for
one serving. Oven calculates time for cooking
multiple servings.
6. To cook on a power level other than full power,
press COOKMATIC LEVEL. "COOK LEVEL"
displays.
7. Enter desired Cookmatic power level.
Lockout and Custom Lock
Use to prevent accidental programming or starting of
oven. Lockout disables all key pads. Custom lock
disables all key pads except one preprogrammed
pad. For example, to access only the popcorn pad,
the custom lock feature would disable the other
pads from operating, allowing only the popcorn pad
to operate.
Programming Lockout:
1. Press LOCK. "0" displays.
2. Press 1,3,5,7.
3. Press LOCK. "LOC" displays, then time of day
and "L" (indicating lockout is on) display. If a
pad is pressed while in lockout mode "LOC"
displays for a second.
Removing Lockout Programming:
1. Press LOCK. "0" displays.
2. Enter 1,3,5,7.
3. Press LOCK. Time of day displays.
8. Press MEMORY SET to lock new instructions
into preprogrammed pad. "P" displays. Note: If
cooking time and/or Cookmatic power level is
changed on multiple program pad, the change is
for one serving. Oven calculates change for
multiple servings. For example, if time is
changed to cook one potato from 3:30 to 3:00,
oven calculates time to cook eight potatoes.
9. To change other preprogrammed pads, return to
step 3.
10. To exit this mode, press STOP/RESET. Time of
day displays.
Programming Custom Lock:
1. Press LOCK. "0" displays.
2. Press 2,4,6,8.
3. Press preprogrammed pad to be left on (not
locked off). For example, to access the popcorn
pad or pad 9 only, press 9. "9" displays.
4. Press LOCK. "LOC" displays, then time of day,
pad number programmed in step 3 ("9" from
example), and "READY" display indicating pad 9
is ready for use. If pad other than accessible
pad is pressed, "LOC" displays for a second.
Removing Custom Lock Programming:
1. Press LOCK. "0" displays.
2. Press 2,4,6,8. "READY" displays.
3. Press LOCK. Time of day displays.