Filter
Top Products
8
AUS
Step 5 Release all buttons.
The timer display will revert to
the time of day with the 'Auto'
symbol lit & 'cookpot' symbol
remaining lit.
At the end of the Cook Period the
'Auto' symbol will flash and an
intermittent audible tone will be
heard.
The audible tone will continue until
cancelled. The 'Auto' symbol will
continue to flash until the timer is
returned to Manual operation (see
below).
Step 6 Press the Manual
button. The audible tone will be
cancelled and the oven(s) will be
returned to Manual.
Step 7 Turn the oven control(s) to the OFF position.
TO CANCEL AN AUTO COOKING
PROGRAMME BEFORE THE COOK
PERIOD HAS FINISHED.
Step 1 Turn the oven control to the OFF position.
Step 2 Press the Manual
button to return the oven to
"Manual" operation. The 'Auto'
symbol will go out.
Note 1 When cooking automatically the Cook
Period can be checked at any time by simply
pressing the Cook Period button.
A
U
T
O
4120
.
A
U
T
O
6120
.
NOTE: The Cookpot symbol disappears
6120
.
OTHER NOTES ON TIMER OPERATION
1. When cooking Automatically the Cook Period can
be checked at any time simply by pressing the
Cook Period button.
2. When cooking Automatically the End Time can be
checked at any time by simply pressing the End
Time button.
3. Having set a Cook Period and End Time an
electronic device stores the information. The device
within the timer will switch the oven(s) on and off at
the required times.
4. When setting an Auto Cooking Programme and a
mistake is made, to clear:-
(a) Press & release the Manual button.
(b) Start the sequence again.
5. If at any time the display shows three flashing zero's
0.00 and 'Auto', it is likely that the electricity supply
to the oven has been interrupted. Reset the timer
to the correct time of day.
Food in the oven may,
therefore, not have been cooked, before serving
check food is thoroughly heated and completely
cooked.
6. To set each function always press and hold the
required function button and at the same time press
"+" or "-" buttons.
5100
.