Beko CCB 5140 XA Ventilation Hood User Manual


 
11 / 11 ENHood / User Manual
6 Troubleshooting Suggestions
Problem Explanation / Suggestion
Hood operates incorrectly
Turn off the hood with sliding switches and cut off electricity supply
for a few seconds by removing the plug or closing the fuse.
Hood does not operate
- Is the plug connected to mains outlet?
- Is the fuse in the household installation burnt off?
- Did you press the fan buttons?
Suction power of the hood is
inadequate
- Is the correct fan level set?
- Is the aluminum cartridge type oil filter or carbon filter cleaned in
time?
- Is the air taken from the kitchen compensated with adequate
amount of fresh air to prevent vacuuming?
- Are the air outlet holes blocked?
- Is the air outlet piping sized or installed incorrectly during
installation? (e.g. small diameter, long air outlet pipe, air outlet with
many turns)
Operating noise increased
abruptly
Is adequate amount of fresh air supplied to the kitchen in air
extraction mode?
Operating noise increased in
the course of time
Have you conformed with the maintenance intervals of the filters; i.e.
is any air passage possible?
Illumination is disabled
- Is the fuse in the household installation burnt off?
- Is the lamp faulty?
- Is the new lamp seated correctly?