Filter
Top Products
12 / 13 EN
5 Cleaning and Care
Prior to maintenance, unplug the appliance or turn
the main switch off or loosen the fuse that supplies
the hood or turn it off.
Clean your stainless steel hood
with cleaning agents specifically produced for this
material.
A
WARNING: Never use rubbing mate-
rials (wire wool) or abrasive materi-
als (brushes, the harder side of the
scouring sponge etc.).
A
WARNING: Sterilizers, products made
of carbon steel or similar mate-
rial containing chloride may cause
black stains, corrosion or permanent
marks when they contact with stain-
less steel.
5.1 Aluminum filter
This filter is intended to retain the oil particles in
the air. You are recommended to clean your filter
every month under normal usage conditions.
1. Push the aluminum filter lock forward.
Note
• You can wash your aluminum filters in dish-
washer also.
• A discoloration may be observed on aluminum
filters as they are washed. This is normal, you do
not need to replace your filter.
2. Then, slightly lower it and pull forward.
Otherwise, you may bend the filter.
3. Wash the filters with liquid detergent and then
rinse them with water.
4. When the filters are dried, re-install the filter in
the reverse order of the above procedure.
5.2 Carbon filter (Flueless usage)
This filter removes the cooking odours.
A
WARNING: Carbon filter should never
be washed. It should be replaced ev-
ery 4 months under normal usage.
You can procure carbon filter from Arçelik
Authorized Dealers.
1. Remove the aluminum filters.
2. Take the carbon filter out from its seat by pulling
it out.
3. Install the new carbon filter.
4. Install the aluminum filters.
Use a soft cloth soaked with liquid detergent to
clean the outer surface of your hood.
A
WARNING: Never use abrasive or
scratching materials for cleaning.
Hood / User Manual