Filter
Top Products
9 / 13 EN
3.4 Flue Set-up
1. Install 2 clamping screw seats to the left and
right holes of the wall hanger.
2. Place the flue connection element freely on the
body.
3. Pull the inner flue connection element upwards
from the flue connection element placed over
the body (Figure 4), and screw the brackets to Z
and axes from left and right sides. (Figure 5)
3 Set-up
3.4.1 Usage without flue connec-
tion
Air is filtered by the carbon filter and returned to
the room. Carbon filter is used when there is no
flue available in the house or when it is not pos-
sible to install the flue pipe.
1. Remove the aluminum filters.
2. To install the carbon filter, center the carbon filter
on the plastic part on both sides of the fan body,
and secure it on the tabs.
3. Reinstall the aluminum filters.
Hood / User Manual