Belshaw Brothers BXC Smartbake Convection Oven User Manual


 
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-
5425
4 MN-1881EN BXC Smartbake Oven
Function of settings:
Power Levels: Not used in current
configuration.
Temperature: The temperature the oven will
bake at for the specified phase. Can be set
from 122 F to 482 F (50C to 250 C)
Bake Duration: The length of time in minutes
the oven will bake in the specified phase.
For example, Phase 1 set at 2 min., Phase 2
set at 4 min., and Phase 3 set at 10 min. has a
total bake time of 16 minutes.
Steam Duration: The length of time in seconds
that steam will be injected into the oven at
the beginning of the phase.
Note: Can be set from 0 to 20 seconds and
will only operate if the temperature is above
250 F (120C).
Fan Cycles: The number of times the fan will
reverse rotation from clockwise to
counterclockwise and back.
Note: Can be set from 0 to 9. Do not set the
fan cycles number higher than 1 cycle per
minute of bake time.
Fan Dwell: The amount of time in seconds that
the fan will stay off during a rotation change.
Note: Can be set from 8 to 15.
Note: The heating elements are off during the
Fan Dwell time.
Damper Delay: The amount of time in minutes
the damper will wait before opening during
one bake cycle.
Note:
Can be set from 0 to 99.
If this time is set higher than the total
bake time, the damper will not open.
The damper will only open once during
a complete bake cycle and will close at
the end of the bake cycle.