Belshaw Brothers BXC Smartbake Convection Oven User Manual


 
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-
5425
8 MN-1881EN BXC Smartbake Oven
WARNING
In the 4-tray oven, do not damage the
control probe protruding from the upper
corner of the inside rear wall of the oven
chamber.
WARNING
Make sure water does not enter the control
panel or rear access panel.
WARNING
Do not remove the rear paneling inside the
oven. This allows access to the fan
assembly and could cause injury.
Maintenance
Check for frayed or bare cables. The
machine must not be used if there are frayed
or bare cables.
Follow cleaning instructions exactly.
Check condition of the rubber door seal.
Repair or replace if necessary.
If the light bulb burns out, use the following
instructions to replace it.
a. Disconnect the oven from the main power
supply and allow to cool.
b. Remove the glass front from the lamp
unit.
c. Remove the bulb by unscrewing
counterclockwise and replace with a new
bulb.
d. Refit the glass front.
e. Reconnect the oven to the main power
supply and test the lights.
If the steaming operation deteriorates, clean
the pipe aperture with a pin to remove any
build-up.
Lubrication
This machine does not require special
lubrication.