Filter
Top Products
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-
5425
BXC Smartbake Oven MN-1881EN 5
Operation 2
Operating conditions
For the most efficient operation, the following
instructions must be followed. Failure to comply
with these guidelines may affect the warranty.
The ambient temperature around the oven
must not exceed 115 F (40 C).
The ventilation around the oven should be
enough to ensure that there is no
condensation on or around the oven from
steam.
It is the customer’s responsibility to arrange
for adequate ventilation and operational
clearance at the back and sides of the oven to
allow circulation of air.
Running Pre-set programs
1. Connect water ensuring there are no leaks.
2. Connect the power to a suitable outlet.
3. Turn on the oven by pressing the green
button and the following screen will appear
(Figure 2-1):
Figure 2-1
4. Press Button 4 (which corresponds to the
“select product” option in Figure 2-1) and the
program list will appear (Figure 2-2). If the
oven has not been programmed, see the
section on programming on page 3.
Figure 2-2
5. Highlight the desired program by pressing
buttons 2, 3, 5, or 6 to scroll down, up, 10
down, or 10 up, respectively.
6. Start heating the oven by pressing button 4
for a ½ load bake or button 1 for a full load
bake. The following screen will appear
(Figure 2-3). To stop heating, press the
stop/Back button at any time.
Figure 2-3