Filter
Top Products
Belshaw Bros., Inc. 1750 22
nd
Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322-
5425
BXC Smartbake Oven MN-1881EN 3
Programming the control
panel
The BX Smartbake oven is capable of storing 99
preset bake settings. To program these settings
into the oven, follow these instructions.
1. Press the Stop button to get to the first screen
(see Figure 1-2).
Figure 1-2
2. Press button 2 for the pass code screen (see
Figure 1-3).
Figure 1-3
3. Enter the pass code using the numbered
buttons (default is 111111). The following
screen will appear (see Figure 1-4).
Figure 1-4
4. Press button 1 for full bake set-up or button 4
for ½ bake set-up. All parameters for the
program can now be set.
5. The oven is capable of six different phases
per bake, and if fewer are required, the time
can be left at 0 to leave that phase
inoperative.
To move across the screen, press button
4.
To move back, press button 1.
To increase the value of the parameter,
press button 3.
To decrease the value of the parameter,
press button 2.
6. Program Title: To set the program title,
press button 6 to go up the alphabet and
button 5 to go down the alphabet.
When all parameters are complete, press Stop
three times to save the setting. Repeat this
process for each program required.