Filter
Top Products
be easily inserted. It also will not grind grain, coffee
beans, or spices with a high oil content. Do not chop Ice
it will damage the Bowl and dull the Knife Blade.
TO ASSEMBLE FOOD PROCESSOR
IMPORTANT: Be sure the Food Processor is off and
unplugged before removing or inserting parts.
Food Processor Bowl
To attach Bowl to Base, hold Bowl with Front facing you
(A). Set Bowl into Round Well and rotate until its Locking
Tabs drop down into the Base. Twist the Bowl
counterclockwise as far as it will go. Be sure both Lock-
ing Tabs drop into place. Use markings on the Push But-
ton Control Panel as a guide.
Reversible Slice/Shred Disc
NOTE: The Reversible Disc will slice or shred depending
upon which side is facing upward.
Position the Bowl on the Base and place the Disc Stem
on the Center Post (B1). Grasp the Disc by the Center Hub
with the desired side (slice or shred) facing upward.
Rotate the Disc until it slides down into place.
IMPORTANT: For your protection, this unit has a system
that locks the Cover and Bowl onto the Base for safe
usage. Do not attempt to operate the unit without the
Cover and Bowl locked correctly in place. An attempt to
do so will turn on the Indicator Light but the unit will not
operate. If this happens check to ensure the cover is
completely on.
French Fry Disc (MODEL FP1011 ONLY)
The French Fry Disc is also used with the Disc Stem. This
Disc must be mounted with the cutting blades facing
upward, and is installed the same way as the Slice/Shred
Disc (C).
Knife Blade
Position the Bowl on the Base. Grasp the Blade by its
Center Hub and slip the Blade down over the Center Post
of the Bowl. (D).
A
B
1
B
2
4
C