Filter
Top Products
English
-9-
Note: The blender will not operate if the
processor lid is not locked in position.
• To remove the blender attachment, turn
the appliance off & wait until all parts
come to a complete stop then remove
the processor lid (12).
• Rotate the blender in a clock-wise
direction & lift it from the appliance.
• Close the safety cover (1) & press it
down until it locks in place.
Note: Do not fit any attachments to the
bowl attachment (9) when using the
blender attachment.
Note: Never operate the blender when
empty.
Mill Attachment (fig. B)
• Press the safety cover release (2) & raise
the safety cover (1) to the open position.
• With the ingredients in the mill
attachment (10), place it onto the main
unit (3) & rotate the lid (22)
anti-clockwise until it locks in place.
• Place the processor bowl attachment (9)
over the spindle (6). Rotate the lid (12)
clockwise until it locks in place.
Note: The mill will not operate if the
processor lid is not locked in position.
• To remove the mill attachment, turn the
appliance off & wait until all parts come
to a complete stop then remove the
processor lid (12).
• Rotate the mill in a clock-wise direction
& lift it from the appliance.
• Close the safety cover (1) & press it down
until it locks in place.
Note: Do not fit any attachments to the bowl
attachment (9) when using the mill
attachment.
Note: Never operate the mill when empty.
Whisk, Kneading & Chopping Blade
Attachments (fig. C)
• Close the safety cover (1) & press it down
until it locks in place.
• Place the processor bowl attachment (9)
over the spindle (6).
• Fit the required attachment (13, 14 or 15)
over the spindle (6), rotating it to ensure it
drops into place.
• Place the lid (12) onto the bowl (11) &
rotate clockwise until it locks in place.
• Fit the pusher (17) into the hole in the lid
(12).
• To remove the attachment, turn the
appliance off & wait until all parts come
to a complete stop then remove the
processor lid (12).
• Lift the whisk from the appliance.
Note: Never use the whisk for kneading
dough
Note: Always leave the pusher in place
when an attachment is fitted in the bowl.
Note: The appliance will not operate if the
will not operate if the lid (35) is not locked in
position.
Note: Care must be taken when handling
the sharp cutting blades, emptying the bowl
and during cleaning.