Filter
Top Products
English
-7-
Press power once 100%
The LED display will show "P100"
Press power twice 80%
The LED display will show "P 80"
Press power three times 50%
The LED display will show "P 50"
Press power four times 30%
The LED display will show "P 30"
Press power five times 10%
The LED display will show "P 10"
Setting the Clock
When the microwave oven is connected to
a suitable electrical supply, the oven will
display "0:00".
To set the correct time, for example: To set
8:00 .
1. Press the "CLOCK/PRE-SET"
button. The hour figures will flash.
2. Press the number buttons "8","0","0" in
order.
3. Press the "CLOCK/PRE-SET"
button to finish setting the clock. The
time will be shown in the LED display.
Note: If "STOP/CLEAR" button is
pressed or if there is no operation within 1
minute, the oven will revert to its previous
state automatically.
Use (Fig. C)
Using the handle (8) open the door (6) then
place the container onto the glass tray (4).
Close the door & press the Power
button repeatedly until the required power
setting is shown in the LED display.
The Microwave power level can be
adjusted to suit the required cooking
method. There are five power settings
available. These are:
Enter the required cooking time using the
numbered buttons on the control panel (1).
Note: The maximum microwave cooking
time is 100 minutes and 39 seconds.
Press the "Start / Express Cook"
button to start cooking.
Example: To cook an item at 50% power
for 10 minutes
1 Press the Power button three
times so that P50 shows in the LED.
2 Press the numeric buttons 1, 0, 0, 0 in
sequence
3 Press the “Start/Express Cook”
button to start cooking
Note: During power cooking, the Power
button can be pressed to display the
current microwave power in the LED for 3
seconds. After three seconds, the display
will revert to normal.
Start
Speed Cook
Start
Speed Cook
Stop
Clear
Clock/
Pre-Set
Clock/
Pre-Set
Power
Power
Power
Power
Power
Power
Power
Power