Filter
Top Products
22
Fitting the Stability Bracket
REAR WALL
165 mm
The stability bracket supplied with the
cooker must be fitted by the installer (see
Fig.7).
1. Place the cooker in its intended position
and mark the cooker height.
2. Mark 165mm below the cooker height.
This is the position of the stability
bracket.
3. Fix the stability bracket (using two of the
provided five fixing holes) to the rear wall
(see diagram).
4. Pull the cooker towards the rear wall as
shown in the diagram. The stability
bracket should then come into contact
with the rear panel of the cooker.
Check that the stability bracket securely
prevents the cooker from accidently tipping
forward when a downward force is applied
to the open oven door.
Fig. 7