Filter
Top Products
Installation
4
Delivery and Location
DELIVERY AND INSPECTION
All Blodgett ovens are shipped in containers to
prevent damage. Upon delivery of your new oven:
D Inspect the shipping container for external dam-
age. Any evidence of damage should be noted
on the delivery receipt which must be signed by
the driver.
D Uncrate the oven and check for internal dam-
age. Carriers will accept claims for concealed
damage if notified within fifteen days of delivery
and the shipping container is retained for in-
spection.
The Blodgett Oven Company cannot assume
responsibility for loss or damage suffered in
transit. The carrier assumed full responsibility
for delivery in good order when the shipment
was accepted. We are, however, p repared to
assist you if filing a claim is necessary.
OVEN LOCATION
The well planned and proper placement of your
oven will result in long term op erator convenience
and satisfactory performance.
The follow ing clearances must be maintained be-
tween the oven and any combustible or non-com-
bustible construction.
D Oven body right side --- 1/2” (1.3 cm)
D Oven body left side --- 1/2” (1.3 cm)
D Oven body back --- 1/2” (1.3 cm)
D Oven body bottom --- 1/2” (1.3 cm)
Adequate clearances must be available for servic-
ing.
D Keep the oven area free and clear of all combus-
tibles such as paper, cardboard, and flammable
liquids and solvents.
D Do not place t h e oven on a curb base or seal to
a wall. This will restrict the flow of air and prevent
proper ventilation resulting in damage to the
oven.
Before making any utility connections to this oven,
check the rating plate to be sure the oven specifi-
cations are compatible with the electrical services
supplied for the oven.
1. The rating pla te is attached under ledge
above the door.