Filter
Top Products
Operating Your Kettle
Before plugging the kettle into the wall outlet, check that the electrical circuit is
not overloaded with other appliances.
SETTING UP THE KETTLE:
1. Set the base on a at, even and steady surface.
2. Remove the kettle from the base. Place the wa-
terproof cover on top of base.(ill. A)
3. Take off the lid. Fill the kettle with cold water
(ill. B). Do not ll over the ‘max’ indicator marking.
4. After lling the kettle with water, insert the lid into
kettle with holes facing towards handle. Plug the
power cord into the standard wall outlet. (ill. C)
5. Put the kettle rmly on the base and press the
on/off button. The power on indicator light will turn
on. The display ashes the set temperature for 3
seconds. (ill. D)
The factory default temperature is 185°F (85°C)
PREPARING THE KETTLE FOR FIRST TIME
USE:
1. Fill the kettle to Max ll line with cold water and
then heat at the maximum temperature setting, then
empty.
2. Let the appliance cool down 1 minute
3. Repeat heating cycle and rinse. Your kettle is now
ready for use.
SELECTING THE DISPLAY
TEMPERATURE UNITS, °F or °C:
Press the °F/°C button to display the temperature in
Fahrenheit or Celsius when the power is on.