Filter
Top Products
SELECTING THE PRESET TEMPERATURES (ILL. E):
Press the temperature set button and continue to
press it until your desired preset temperature is dis-
played.
Note: The Factory preset temperatures are: 60°C
(140°F), 80°C (176°F), 85°C (185°F), 88°C (190°F),
96°C (205°F) and 98°C (208°F).
MANUALLY SETTING TEMPERATURE SET POINT
1. Press the temperature set button. The last temperature set point ashes on
the display.
2. Press the + or – button to select your preferred temperature.
3. Once the display stops ashing the temperature is set and the display shows
current water temperature.
Once you have set the temperature set point, it is stored in memory and will be
recalled whenever you turn on the kettle. There is no need to set the tempera-
ture every time unless you want to change the set point.
During the heating cycle the LED display shows the current water temperature.
After the set temperature is reached the heater will turn off but the display will
continue to show water temperature for up to 1 hour if the kettle isn’t removed
from the base.
If the kettle is removed from base during a heating cycle the heating cycle and
power on indicator light turn off. The LED will display “0 00”. When the kettle is
returned to base the display will show current water temperature for 7 minutes
and then turn off.
To manually interrupt the heating process, press the on/off button at any time.
The heater and LED lights will turn off.
SELECTING WATER TEMPERATURE HOLD
This feature allows the kettle to reach and maintain water at a set temperature
for up to one hour. This is an optional setting.
1. First select the temperature set point using above steps.
2. Press the hold button and the hold indicator LED will turn on. (ill. E).