Filter
Top Products
3. When set temperature is reached the heater will turn off and on as needed to
maintain set temperature. The power on indicator light is on and the LED display
shows the current water temperature.
4. When you lift kettle to pour and return to the base, the hold button must be
pressed again if you want to continue the hold temperature function. If you don’t
press the hold button after returning the kettle to base, the display will show
current water temperature for 7 minutes and then the unit will power off.
HIGH ALTITUDE USE
At higher elevations water boils at lower temperatures. Use the graph
below to set your kettle temperature.
COUNT UP TIMER FEATURE
Note: when you lift the kettle, the LED display will show the count-up timer.
The rst number indicates the minutes, and the last two numbers indicate the
seconds (the maximum count time is 7 minutes). Press the + button to start the
timer. Set the kettle back on the base and lift back off to reset timer to zero.