Filter
Top Products
9
Before using the appliance for the first time
This section tells you everything you need to do before using
the appliance for the first time.
■ Set the clock
■ Change the language for the text display if required
■ Heat up the cooking compartment
■ Clean the accessories
■ Read the safety information at the start of the instructions for
use. This is very important.
Initial setup
Once your new appliance has been connected to the power
supply, the "Basic settings" heading appears in the top line of
the display. Set the time, and also the text display language, if
required. German is the default language.
Setting the clock and changing the language
1.Turn the rotary selector to set the current time.
2.Press the
X button.
"Sprache wählen: deutsch" appears.
3.Select the desired language using the rotary selector.
30 different languages are available.
4.Press the
0 button.
The language and time are applied. The current time is shown
in the display.
Note: You can change the language at any time. See the Basic
settings section.
Heating up the cooking compartment
To get rid of the new appliance smell, heat up the cooking
compartment when it is empty and the oven door closed.
Make sure that the cooking compartment contains no leftover
packaging, e.g. polystyrene pellets.
Keep the kitchen ventilated the whole time the oven is on.
Heat up the cooking compartment to 240 °C using Top/bottom
heating.
1. Press the
% button.
The initial display including descriptions of the buttons
appears.
2.Immediately press the
! button.
The heading "Types of heating" appears in the top line. 3D
hot air and a temperature of 160 °C are suggested in the
settings area. Brackets appear around the type of heating.
3.Turn the rotary selector to change the type of heating to Top/
bottom heating.
4.Press the
X button to switch to the temperature.
The brackets now appear around the temperature.
5.Use the rotary selector to set 240 °C.
6.Press the n button.
Operation starts. The "Types of heating" heading disappears.
7.Switch the oven off after 60 minutes using the
% button.
The temperature indicator bars show the residual heat in the
cooking compartment.
Cleaning the accessories
Before you use the accessories for the first time, clean them
thoroughly with hot soapy water and a soft dish cloth.
Switching the oven on and off
You can switch the oven on and off with the % button.
Switching on
Press the% button.
The initial display including descriptions of the buttons appears.
Select the desired operating mode:
■ ! button = types of heating
■ ` button = programmes
■ q button = self-cleaning
■ f button = saved memory setting
If no button is pressed in the next few seconds, a suggested
setting is displayed. This is always the 3D hot air type of
heating and 160 °C.
You can select a different operating mode at any time.
A detailed description of how to make settings is provided in
the individual sections.
Switching off
Press the % button. The oven is switched off and the time
appears in the display.
([LWZLWK
%DVLFVHWWLQJ
7LPHRIGD\
7\SHVRIKHDWLQJ
3URJUDPPHV
6HOIFOHDQLQJ
7\SHVRIKHDWLQJ
'KRWDLU
&