Filter
Top Products
44
Installation of the
built-in oven
Push the oven into the cabinet aperature and
align the unit until it is in a level position.
Open the oven door and, using one screw on
each side, fasten the built-in oven to the side
strips of the conversion cabinet.
When screwing in the two screws (enclosed in a
bag with the built-in oven), ensure that they are
pointing outwards at a slight angle. Please use
these screws only.
Verify that the built-in oven is positioned securely
and in a level position, and that the required
installation dimensions have been maintained.
Furniture requirements
Oven housings from virtually all lines of kitchen
furniture are suitable for installing the built-in
oven. However, the veneers or plastic laminates
on the conversion cabinets must be applied with
heat-resistant adhesive (90 °C).
If plastic laminates or cement are not sufficiently
heat-resistant, warping, bubbling or detachment
of the finish may result.