Filter
Top Products
Getting Started
English 18
4. Turn the knob to the right to increase temperature to +25° F and to the left to
decrease to -25° F. The temperature changes by 5° F increments.
5. Press START to accept a temperature change.
Reset the Factory Set-
tings
This feature is used to change all the “Select Functions” settings back to the
original factory settings (or defaults).
1. Access SELECT FUNCTIONS Menu.
2. Turn knob clockwise until RESET DEFAULTS is displayed.
3. Press START. Display reads SELECT FUNCTIONS.
Set the Sabbath Feature About the Sabbath Feature
The Sabbath Feature enables those of particular faiths to use their ovens on the
Sabbath.
• The oven will bake for 73 hours before automatically turning off.
• While baking in Sabbath mode, the display will show SABBATH and the
BAKE icon will be displayed. The clock will be off and no temperature will
show in the display.
• During the Sabbath mode, only the OFF key will operate. Press OFF at any-
time during the Sabbath mode to end the mode and turn off the oven.
• At the end of 73 hours, the oven will turn off automatically and the display
will show SABBATH END. Press OFF to return to time of day.
• The warming drawer does not operate with the Sabbath feature unless the
feature is also activated in the oven.
• The probe CANNOT be used during the Sabbath mode.
Setting the Sabbath Feature for the Oven Only
1. Verify that the oven is turned off.
2. Access SELECT FUNCTIONS Menu.
3. Turn knob clockwise until SABBATH OPTION appears.
4. Press START. BAKE will show in display and temperature will flash.
5. Turn knob to set oven temperature.
6. Turn oven light on if desired (press LIGHT).
Note:
The light cannot be changed after this point. It will stay on or off, as
selected, during the entire Sabbath mode.
7. Press START. Oven starts after 5 seconds.
The oven operates for 73 hours and then turns off automatically.
Setting the Sabbath Feature for both the Warming Drawer and the Oven
Note:
Warming drawer does not operate with the Sabbath feature unless
the feature is also activated in the oven.
1. Turn the warming drawer on to the desired heat setting. See “Turning on the
Warming Drawer” on page 27
2. Verify that the oven is turned off.
3. Access SELECT FUNCTIONS Menu.
4. Turn knob clockwise until SABBATH OPTION appears.
5. Press START. BAKE will show in display and temperature will flash.
6. Turn knob to set oven temperature.
7. Turn oven light on if desired (press LIGHT).