Filter
Top Products
10
and that you have removed the motor drive
cover.
1. Before using the mixing bowl and
dough hook for the first time, it
is recommended that the bowl,
anti-splash cover, filling funnel cap
and dough hook be washed. All
components of the mixing bowl and the
dough hook are dishwasher safe. Or
they may be washed in warm soapy
water. After washing, rinse well and dry
before using.
The driveshaft can be removed for
cleaning by pushing down on the shaft,
as shown in figure 5a. After washing,
rinse and dry the driveshaft and replace
in the bowl by pressing it in, from the
bottom, as shown in figure 5b, until it
snaps into place.
Figure 5.
2. If you have not already done so, remove
the motor drive cover from the power
unit’s mono drive and place the mixing
bowl, whether the stainless bowl or the
plastic bowl, on the mono drive of the
power unit and turn the bowl counter-
clockwise with a slight downward
pressure until bowl is firmly seated on
the mono drive coupling, see figure 6.
CAUTION
Failure to make sure that the bowl is
properly seated on the mono drive coupling
before the power unit is turned on can result
in damage to the bowl and/or coupling.
a.
e.
d.
c.
b.
Figure 4.
4a. Bowl (either stainless steel or
plastic) with anti-splash cover and
filling funnel cap
4b. Standard dough hook (all systems
except MUM 7010 UC)
4c. Twin beating whisks
4d. Professional dough hook (MUM
7010 UC model only)
4e. Bowl scraper
How to Use Dough Hook
The dough hook and mixing bowl are
intended to be used to knead yeast doughs
and to mix cookie and pastry doughs and
also when adding nuts, chocolate chips,
dried fruit, hard butter or shortening,
hardened brown sugar, etc. to batters.
Use of mixing bowl with dough hook
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to off position “O/Off,”
a. b.