23
Removing Contents
Before beginning to remove the contents
from the food processor, make sure that the
power unit has been turned to the Off
position, “O/Off.” Remove the top cover from
the bowl by depressing the interlock button
on the handle, step 1, and turning the cover
clockwise, step 2, while lifting, see figure
21a. With the cover removed the bowl can
be removed from the power unit by turning
it clockwise while lifting, see figure 21b.
The contents of the bowl may now be
poured into a suitable container or bowl, as
desired. Be sure to hold the processor blade
in the bowl by placing a finger on the top of
the processor blade’s center column while
pouring.
Next lift the processor blade out of the bowl
by grasping the knob of the center column
of the processor blade and lifting.
CAUTION
Processor blade is very sharp.
Handle with care.
Care and Cleaning
of Food Processor Blade and Bowl
All components of the food processor are
dishwasher safe. Do not use scouring
cleaners on any of the food processor parts.
The power unit of the kitchen machine
should be cleaned with a clean, damp cloth
only. Never use coarse or caustic cleaning
products to clean this appliance. Never
immerse the power unit in water.
How to Use Discs w/5-Cup Capacity Bowl
The food processor attachment provided with
the MUM 7150 UC Bosch Concept Series
Kitchen Machine also has a disc holder with
3 discs, in addition to the processor blade,
see figure 18.
The disc holder, three discs and its 5-cup
capacity bowl are intended to be used for
slicing, shredding and/or grating of
vegetables, as well slicing/shredding of soft
cheeses and sausages or meat and grating
of vegetables and hard cheeses.
Use of disc holder and discs
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work surface
and switched to the Off position, “O/Off,” and
that you have removed the motor drive cover.
1. Before using the bowl with the disc
holder and discs for the first time, it is
recommended that the bowl, bowl
cover, pusher/measuring cup, disc
holder and discs be washed. All
components of the food processor
attachment are dishwasher safe. Or
they may be washed in warm soapy
water. After washing, rinse well and
dry before using.
2. If you have not already done so,
remove the motor drive cover from the
power unit’s mono drive and place the
bowl on the mono drive of the power
unit and turn the bowl counter-
clockwise with a slight downward
pressure until the bowl is firmly seated
on the drive coupling, see figure 19a.
3. Select disc to be used and place on
disc holder and place over driveshaft,
see figure 22a.
Figure 22.