Filter
Top Products
6
> The whisk holder should be hand
washed in warm soapy water, rinsed
and dried.
> The blender’s blade/base assembly
should be washed under running water
and dried.
Note: It is recommended that the blender’s
blade/base assembly never be left to
stand in water or soap solution to prevent
the bearing lubricant from being washed out.
Getting to Know Your Bosch Kitchen
Machine
The Bosch Concept Series Kitchen
Machines are comprised of various
attachments, depending on the system
purchased (see above). In addition to the
attachments listed on the previous pages
that are available with the standard systems,
Bosch offers many special accessories.
Special Accessories
To allow you to get the most service from
your Bosch Concept Series Kitchen
Machine, Bosch engineers have designed
a line of special accessories to expand the
usefulness of your machine. In addition to
the attachments that come with the various
Concept Series Kitchen Machines, there
are optional accessories that can be ordered
separately. These accessories include a
food and meat grinder, grain mills, citrus
juicer and ice cream maker, plus additional
attachments that can be used with the meat
grinder: fancy cookie attachment, fruit
pulper, pasta-making disks and grater
attachment. See SPECIAL
ACCESSORIES, at the back of this
booklet, page 30. Or, to view all currently
available accessories, visit our Web site at
www.boschsmallappliances.com
Work on expanding the usefulness of the
Bosch Kitchen Machine is a continuing
process. If there is some type of accessory
in which you are interested in that is not
included at the back of the book, please
either write us at:
• Bosch Small Appliances
Customer Support
BSH Home Appliances
5551 McFadden Avenue
Huntington Beach, CA 92649
or call us at:
• 1 (866) 44BOSCH
[1 (866) 442-6724]
Power Unit Features
All MUM 7000 power units have the following
features, refer to figure 2:
700-watt motor
The most powerful motor offered with any
household kitchen machine.
Electronic speed control
Six-position rotary switch is located at front
of power unit: 4 speeds plus a momentary
pulse function and a stop position “O/Off,”
see figure 2a.
Control status indicator
Indicates when power unit is functioning
normally, or if there is a problem that has
caused the electronic safety control to be
activated, see figure 2b:
• The indicator will glow steadily when
the power unit is functioning normally.
or,
• The indicator will flash if the electronic
safety control of the power unit has
been activated.
Mono drive
Four electronically controlled shaft speeds
are all available from a single location; each
attachment automatically connects to the
appropriate drive speed.
Motor drive cover
Used to cover mono drive when not in use,
see figure 2c.