Filter
Top Products
10
6. Always grasp multifunction blade by
top of center column. Do not grip by
the blades.
The Bosch Food Processors are provided
with a three-quart mixing bowl and
multifunction blade, beater or whipping
whisk, dough hook, reversible slicing disc,
reversible coarse grating disc and fine
grating disc (MCM 5200 UC only) as shown
in figure 5.
How to Use Multifunction Blade
All the MCM models comes with the mixing
bowl, cover and pusher/measuring cup and
multifunction blade. The multifunction blade
is intended to be used for mincing, pureeing
and pulverizing of fruits, vegetables, nuts
and dried bread (preparation of bread
crumbs) and the preparation of sauces,
special diet foods, infant foods and mixing.
The multifunction blade should not be used
to process hard cheeses (Parmesan,
Romano, etc.
Use of mixing bowl with multifunction blade
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
1. Before using the mixing bowl and
multifunction blade for the first time they
should be washed. See Before Using
for the First Time, on page 4.
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
Attachments
The attachment(s) that have been used
should be disassembled and washed, dried
and stored for future use.
It is recommended that, after cleaning, the
mixing bowl and its cover be stored on the
food processor. In this way, if you wish at
some later time to use the blender, the
mixing bowl and its cover will already be in
place.
STANDARD ATTACHMENTS
Following are the specific instructions for
the standard attachments provided with the
Bosch Food Processors, covered by this
manual.
Mixing Bowl with multifunction blade,
beater or whipping whisk, dough hook,
reversible slicing disc, reversible
grating disc and, MCM 5200 UC only,
fine grating disc
WARNING
1. There is a risk of injury from rotating
tools when using the mixing bowl with
the multifunction blade, dough hook,
whipping whisk, beater or with discs.
2. Avoid contact with moving parts. Keep
hands, hair and clothing, as well as
spatulas, bowl scrapers and other
utensils away from blades, hooks,
whisk, beater and discs during
operation to prevent injury and/or
damage to the power unit or
accessories.
3. Always work with the bowl lid cover
fitted in place.
4. Do not change tools until the power unit
has come to a complete stop; when
switched Off, the power unit will
continue to turn for a brief period.
5. Always place protective cover on
multifunction blade when it is not in
use.