Bosch Appliances UC MCM 5200 Blender User Manual


 
19
Citrus Juicer
All the MCM models of the Bosch Food
Processors include the citrus juicer
accessory. The citrus juicer accessory is
shown below, figure 12.
Figure 12.
How to Use Citrus Juicer
The citrus juicer fits into the mixing bowl
for juicing of citrus fruits such as oranges,
lemons, grape fruit, etc. The juice is then
collected in the mixing bowl.
Use of mixing bowl with citrus juicer
Before beginning to attach this or any other
attachment, make sure that the power unit
is on a smooth, clean, suitable work
surface and switched to the Off position,
“O/Off,” and that you have the safety motor
drive cover in place of the high speed,
blender drive.
1. Before using the mixing bowl and citrus
juicer for the first time, they should be
washed. See Before Using for the
First Time, on page 4.
2. Make sure the safety motor drive cover
has been snapped into place on the
high-speed blender drive. Place the
mixing bowl on the dual drive of the
power unit, as shown in figure 4a, and
turn the bowl clockwise with a slight
downward pressure until bowl is firmly
seated.
3. Place the citrus juicer on the dual
drive of the power unit by placing it over
the center column and turning it
clockwise, as shown in figure 13, until
tab on cover enters cover interlock and
turn until tab on the rim of the citrus
juicer clicks into place.
Figure 13.
Placing into Operation w/Citrus Juicer
Make sure that the power unit is on a
smooth, clean, suitable work surface and
switched to the Off position, “O/Off.” Pull
the electrical cord out to the necessary
length and plug into a convenient outlet.
The mixing bowl with citrus juicer is now
ready for operation.
Citrus juicer tips:
Wash citrus fruit and cut in half for juicing.
Set the rotary switch to speed 2 and press
the fruit on the cone of the juicer. Be sure
to check level of juice in bowl and empty
juice into a suitable container before level
of juice reaches level of bottom of strainer
basket, see Removing Contents, below.