Filter
Top Products
A
u
to
M
a
nu
al
Heating
S
ta
n
db
y
Auto
Manual
Heating
Standby
Auto
Manual
Heating
Standby
1
2
Auto
M
anual
Heating
Standby
Auto
Manual
Heating
Standby
Auto
Manual
Heating
Standby
1
2
8 How to use the machine – Manual Mode How to use the machine – Manual Mode 9
How to use the machine – Manual Mode
While Tassimo is designed to make the optimal drink every time, your tastes
may be different. With Tassimo, you can customize your cup by adjusting the
amount of water and brewing time to suit your personal preferences.
For a milder flavor and a larger beverage
Follow steps 1-4 as described in “Auto Mode” (see page 6). When
the indicator light moves from AUTO to MANUAL, simply press
and hold the start/stop button to add more water.
Take your finger off the start/stop button when your drink
has reached the desired intensity and size. Once you release the
start/stop button, the brew cycle will stop, any remaining liquid
inside the T-DISC will empty into the cup, and the indicator light
will move back to HEATING.
For a stronger taste and a smaller beverage
Follow steps 1-4 as described in “Auto Mode.” When your beverage
has reached the desired strength and size, simply press the
start/stop button to halt the cycle. The brew cycle will stop, any
remaining liquid inside the T-DISC will empty into the cup,
and the indicator light will move back to MANUAL and, after
30 seconds, to HEATING.
INDICATOR LIGHT WHEN THE LIGHT IS FLASHING WHEN THE LIGHT IS SOLID
AUTO Machine is operating in “Auto Mode.” Machine has recognized T-DISC
and is ready to be operated in
“Auto Mode.”
MANUAL Machine is operating in “Manual Mode.” Beverage has finished brewing
and can now be customized.
T-DISC is present but not recognized.
HEATING Water is heating to Water is hot and the machine is
required temperature. ready to make a drink.
STANDBY Machine has not been used for 10
minutes and is conserving energy.
To operate the machine, simply
insert a T-DISC and use normally.
ALL The machine is not prepared for use.
Error: check water level, check T-DISC.