Bravetti FP110H Food Processor User Manual


 
Congratulations! As the owner of a new Swivel Head Food Processor, you are
about to use a very versatile and powerful kitchen appliance that will quickly become
an indispensable item in your kitchen. Bravetti Platinum Pro products are engineered
to meet the highest quality standards and are designed to offer the ultimate in ease of
operation and convenience.
IMPORTANT
For your protection, the Swivel Head Food Processor has a double safety switch so
that it cannot run unless the bowl with lid is locked in place. Do not attempt to by-pass
the safety interlock mechanism.
2
Caution: Remove the protective blade guards from blades before using in the
food processor.
IMPORTANT
The swivel head will not rotate to the unlock position unless the control dial is in the
Off” position.
Cleaning & Maintenance Instructions
Cleaning and Maintenance
Caution: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the “OFF
position and press the swivel head
release button before inserting or
removing attachments.
Never immerse the unit, cord or
plug in water or any other liquid.
Clean the main unit with a damp
cloth only.
Use extreme caution when
cleaning the chopping blade as
the blades are very sharp.
All other parts can be cleaned in
warm sudsy water using regular
dishwashing liquid.
If food has spilled over on to the
main unit, use the pointy end of the
spatula to clean the cracks and
crevices of the base under the food
processor bowl.
The processor lid, protective blade
guards, anti-slip pad and the sealing
ring may be washed in lukewarm
water and a mild dishwashing liquid.
DO NOT place these in the
dishwasher.
Using the Storage Compartment
The food processor comes with a blade
storage compartment.
11
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
Operating Instructions
IMPORTANT INFORMATION
Please read all the following instructions carefully:
Fig. 17
Fig. 18
1. Pull the storage compartment out
from the back of the unit. (Fig. 17)
2. Place blades into the assigned slots
inside as shown below. (Fig. 18)
Note: The blades only fit in each slot
one way, with face of blade facing
towards the center of the blade storage
compartment. The G (large fry blade,
faces the rear of the storage
compartment.