Filter
Top Products
4
Operating Instructions
4. Fit the processor lid onto the food
processor bowl firmly.
Important: The unit will NOT
operate without the processor lid in
place and the swivel head in the
locked position.
5. When fitted correctly, the lip on the
processor lid will fit into the notch on
the food processor body. (Fig. 5)
Fig. 2
Caution: BLADES ARE SHARP!
Always hold the blade assembly
from the top. ALWAYS remove the
chopping blade protective guards
before using.
2. Assemble the main chopping blade
onto the spindle. Ensure that the
tabs on the underside of the spindle
are aligned with the main chopping
blade. (Fig. 3)
Fig. 5
Lip on
Safety
Cover
Fig. 4
Blade & Spindle
Motor Shaft
Speed Control Dial
The speed control dial has speed
settings as follows:
• Off
• 1 to 9
• Max
• Pulse/Turbo
The speed can be adjusted while the
food processor is in use. (Fig. 1)
Use of the Pulse/Turbo button allows
greater control over the texture of the
food being processed. Use "Pulse"
when the unit is in the "Off" position.
Use "Turbo" when the unit is in the
"On" position and you need a burst of
power.
Caution: The "Pulse" and "Turbo"
function is only intended to be used for
short "bursts" of processing. Damage
to the unit may occur if this function is
used for prolonged periods of time.
Operating The Food Processor
Setting Up:
Caution: Make sure that the unit is
un-plugged from the power source and
the swivel head is in the off position
before inserting or removing any
attachments and before cleaning.
Caution: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow motor to stop
and run again for another 20 seconds.
1. Place the food processor bowl onto
the processor body. (Fig. 2)
3. Fit the spindle with chopping blade
onto the motor shaft located on the
bottom of the bowl. (Fig. 4)
Fig. 3
Tabs
Main Chopping Blade
FOR SAFETY, ALWAYS LEAVE
THE PUSHER IN PLACE WHILE
OPERATING THE PROCESSOR.
Note: Do not use for dough.
Hints & Tips for Whipping:
• Use to make whip egg whites or
whipped cream.
• When whipping egg whites make sure
that eggs are at room temperature for
best results.
Operating Instructions
Whipping Blade
Caution: Make sure that the unit is
unplugged from the power source
and the speed dial is in the “Off”
position. Press the swivel head
release button so that the swivel
head is in the unlocked position
before inserting or removing
attachments.
Caution: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow the motor to
stop and run again for another 20
seconds.
1. Fit the processor bowl and spindle
as previously described.
2. Fit the whipping blade over the
spindle and press firmly into place.
(Fig. 16)
3. Place the ingredients into the bowl.
4. Fit the lid onto the bowl. Rotate the
swivel head and press to lock into
position. Insert food pusher into
feed chute.
5. Plug in the food processor.
6. Turn the food processor “On”
selecting high speed.
7. Remove the whipping blade from
the bowl before removing the
whipped ingredients.
Fig. 16
9
* Always allow food to cool before placing in the bowl.
PRODUCT QUANTITY RECOMMENDED
SPEED
OPERATION
TIMES
EGGS 4 LARGE EGGS 1-MAX 10 – 20 SECONDS
WHIPPING CREAM 17.5 OZ/500mL 8 – MAX 15 – 30 SECONDS
Processing Examples With The Whipping Blade
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
Fig. 1
Pulse