Bravetti FP110H Food Processor User Manual


 
3
Operating Instructions
10
Re-settable Thermal Safety
Device
Your Swivel Head Food Processor
has been designed with a unique safety
system which prevents damage to the
unit’s motor and drive system, should
you inadvertently overload your
appliance. The safety system will
automatically cut the electric power to
the appliance when the device senses
an overload or excessive temperature
in the motor or drive system. Should
this occur during use and the appliance
stops functioning, following is the re-
setting procedure:
1. Turn the On/Off speed control dial
to the “Off” position
2. Unplug the unit from the wall
receptacle and press the swivel
head release button before
inserting or removing attachments.
GETTING TO KNOW YOUR
SWIVEL HEAD FOOD PROCESSOR
1. Swivel Head
2. Turbo Pulse Button
3. Speed Control Dial
4. Swivel Head Release Button
5. Food Processor Body
6. Blade Storage Compartment
7. Suction Cups
8. Food Processor
Food Pusher
9. Processor Lid
10. Processor Lid Seal
11. Whipping Blade
12. Processor Double Blade
13. Protective Blade Guards
(x2)
(For storage purposes only)
14. Processor Main
Chopping Blade
15. Processor Spindle
16. Food Processor Bowl
17. Processor Bowl Shaft
18. Julienne Blade
19. Grater
20. Thick Shredding Blade
21. Thin Shredding Blade
22. Thick Slicing Blade
23. Thin Slicing Blade
24. Main Blade Holder
25. French Fry Blade
26. French Fry Blade Holder
27. Spatula
Technical Specifications
Voltage: 120V., 60Hz.
Power: 550 Watts
Food Processor Capacity: 6 Cups (1.5 Liters)
* Note: Illustrations may differ from actual product
3. Remove and empty the processor
bowl. Ensure that no
food is jamming the cutting blades
or attachments.
4. Allow the appliance to cool down
for a minimum of 30 minutes.
5. Re-install the processor bowl, turn
the swivel head to the locked
position and re-plug appliance in
the wall outlet.
6. Proceed to use the appliance as
before. Should the appliance still
fail to operate, turn the On/Off
speed control to the “Off” position
and unplug from the wall outlet.
Allow the appliance to cool down
for an additional 1 to 2 hours.
After this time has passed, repeat
the restart procedure, steps 5 and
6 above.