Filter
Top Products
Operating Instructions
9. When finished processing the
ingredients, turn the speed control
dial to the “Off” position and
press the swivel head release
button. The swivel head will
automatically turn to allow you to
remove the bowl lid.
10. Remove the chopping blade(s) first
before removing the processed
food.
FOR SAFETY, ALWAYS USE
THE FOOD PUSHER WHEN
PUTTING FOOD INTO THE THE
FEEDER TUBE. NEVER FEED
BY HAND.
6
Fig. 11
4. Place ingredients to be processed
in the bowl.
5. Place the processor lid onto the
bowl with lip inside of the notch on
the food processor body. Rotate the
swivel head and press to lock into
position. Insert the food pusher into
the feeder tube.
6. Plug the processor into a wall outlet.
7. Turn the speed control dial to the
desired speed setting.
Note: The food processor unit will not
operate if the swivel head is not locked
securely.
8. Keep hands and utensils away from
the cutting blades while chopping
food to reduce the risk of severe
injury to persons or damage to the
food processor. A scraper may be
used, but ONLY when the food
processor is NOT running and has
been unplugged. Never feed food
by hand. Always use the food
pusher. (Fig. 11)
Operating Instructions
Processing Examples With The Double Chopping Blade
The processing times indicated below are approximate and also depend on the
quantity of the food to be processed and the degree of fineness you require.
7
Fig. 14
Fig. 13
2. Press the other end of the blade
until it clicks into place. (Fig. 13)
Longer Tab
Fig. 12
PRODUCT QUANTITY RECOMMENDED
SPEED
OPERATION TIMES
(used in 10 - 20 second intervals)
MEAT* 24.5 oz / 700 gr. MAX 15 - 30 SECONDS
ONIONS 24.5 oz / 700 gr. 5 - 6 15 - 30 SECONDS
NUTS 21 oz / 600 gr. 8-MAX 15 - 30 SECONDS
LIQUIDS (SOUPS) 24.5 oz / 700 gr. 1 - 8 10 – 20 SECONDS
APPLES 24.5 oz / 700 gr. 8 – MAX 15 – 30 SECONDS
CARROTTS 24.5 oz / 700 gr. 6 - 8 30 SECONDS
BREAD 4 SLICES 6 - 8 15 – 30 SECONDS
FISH* 24.5 oz / 700 gr. 1 - 8 15 - 30 SECONDS
CHEESE 24.5 oz / 700 gr. 1 - 8 15 – 30 SECONDS
PARSLEY MAX 4 BUNDLES MAX 15 – 30 SECONDS
* Remove all bones before processing.
** Always allow food to cool before placing in the bowl.
3. Place the spindle into the food
processor bowl.
4. Using the finger holes in the blade
holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 14)
Hints & Tips for
Chopping Blades:
• The double chopping blade can be
used for chopping meat, fish,
vegetables, cheese, etc. setting the
speed to maximum.
• For finer chopping, increase the
length of time you process.
• For coarser chopping, use the pulse
button for a few seconds and
monitor food texture.
• Pre-cut larger pieces to make them
fit into the feeder tube. When
chopping hard foods (e.g. meat,
cheese) cut into 1-inch ( 2.4 cm)
cubes.
Slicing, Shredding, Grating &
Julienne Blade Assembly
Caution: Make sure that the unit is
unplugged from the power source
and the speed control dial is in the
“Off” position. Press the swivel
head release button so that the
swivel head is in the unlocked
position before inserting or
removing attachments.
Caution: Do not operate the unit for
intervals longer than 20 seconds. If
longer chopping or mixing is required,
run for 20 seconds, allow the motor to
stop and run again for another 20
seconds.
1. Place the blade of your choice on
the blade holder. Insert the longer
tab on the side of the blade holder
first. (Fig. 12)
Warning: Use Extreme Caution
When Handling Blades. Blades Are
Sharp.
5. Place the lid on the food processor
bowl, and lock the swivel head into
position.
6. Plug in the processor and select
desired speed on speed control
dial.