Filter
Top Products
11
OPERATING YOUR BREVILLE KINETIX
®
AERO
BEFORE FIRST USE
Remove and safely discard any packaging
material and promotional labels.
Disassemble the blender by following
disassembly instructions in this manual.
Wash the lid, inner cup, blender jug, and
blade assembly in warm, soapy water with a
soft cloth. Rinse and dry thoroughly. Wipe
the motor base with a damp cloth and dry
thoroughly.
NOTE
The blending blades are extremely
sharp. Avoid any contact with fingers
and hands.
ASSEMBLING AND ATTACHING
THE BLENDER JUG
1. Place the motor base on a flat, dry
surface such as a bench top. Ensure that
the Variable Speed Dial is in the OFF
position and the appliance is switched
off at the power outlet and the power
cord is unplugged.
2. Drop the blade assembly inside the
blender jug into position. Apply a
small amount of pressure to the blade
assembly pushing until it snaps into
place.
3. Turn the blender jug upside down on the
bench. Place the blade assembly collar
onto the blade assembly and turn in a
clockwise direction until tight.
4. Turn the blender jug upright and insert
onto the motor base. The handle of the
blender can be positioned to the left
or the right of the appliance. Add food
or liquid into the blender jug ensuring
not to exceed the MAX mark. Place the
blender lid firmly into position on the
top of the blender jug. Insert the clear
inner cup into the blender and turn until
secured into position.
NOTE
When adding oil or other liquids during
the operation, turn the clear inner
cup to the unlocked position and pour
through the hole in the lid. The inner
cup can be removed to add ingredients
or check the texture of the ingredients.
NOTE
The blender features a Breville
Assist™ Lid. This allows the lid to fit
tightly onto the blender jug, avoiding
displacement during operation. The
ring pull design allows easy removal of
the lid with a simple leverage action.