Filter
Top Products
11
Operating your Breville Wizz Electronic continued
10
Assembling and Attaching the Food
Processor Bowl with the reversible
slicing\shredding disc
Step 1.
Place the motor base on a flat, dry surface such as
bench top. Ensure that the motor base is switched off
at the power outlet and the power cord is unplugged.
Step 2.
Insert the food processor bowl support onto the motor
base, aligning the arrow on the support with the arrow
on the motor base. Place the Food Processor Bowl onto
the motor spindle of the food processor bowl support,
and turn anti-clockwise until locked into position.
Step 3.
Insert the disc shaft over the motor spindle. Place the
disc onto the disc shaft, with required function facing
upwards, for example, for slicing have slicing side
facing upwards. Align the disc centre onto the shaft,
rotate and push down, until it locks into position.
Attach the processor bowl lid by positioning the feed
chute opposite to the handle then turning the lid
anticlockwise until it locks into position.
Step 4.
To commence processing ensure the food pusher is
positioning in the feed chute. Plug the power cord
into a 230/240V power outlet and switch on.
Select a function by pressing in the corresponding
function button on the control panel and its light
will illuminate.
Step 5.
The food pusher can be removed throughout the
processing to add liquids or other foods.
Step 6.
To switch off, press the same button again or press
the Stop button in the middle of the speed
control panel.
Step 7.
At the end of use, switch off at the power outlet and
remove the power cord.
5
6
DO NOT OPERATE THE BREVILLE WIZZ ELECTRONIC CONTINUOUSLY ON HEAVY LOADS FOR
MORE THAN 1 MINUTE.
DO NOT USE THE BREVILLE WIZZ ELECTRONIC FOR ANYTHING OTHER THAN FOOD AND OR
BEVERAGE OPERATION.
1
2
3