Breville BBL500 Blender User Manual


 
Type of Preparation Maximum Function - mix Approximate
food/drink amount at puree etc time
one time
Lean meat Trim excess fat 300g Chop Food 10-20 seconds
and sinew Processor (button 2)
Fish Remove skin and bones 300g Chop Food 10-20 seconds
and cut into 2cm cubes Processor (button 2)
Onions, whole Peel and cut into 300g Chop Food 10-15 seconds
1.5-2cm pieceS Processor (button 2)
Garlic, clove Peel 5 cloves Chop Food 10-15 seconds
Processor (button 2)
Apple, raw Peel, cored and cut 50g Chop Food 10-15 seconds
into 1.5cm pieces Processor (button 2)
Cabbage, green Remove the core and 50g Chop Food 5 seconds
or red cut into 2 cm cubes Processor (button 2)
Peanuts, whole, Remove the skin 200g Grind Food 15 seconds
shells removed Processor (button 5)
Bread or Cut bread into 2 cm pieces 100g Chop Food 15 seconds
biscuit crumbs and break up biscuits Processor (button 2)
Mayonnaise Mix the egg yolk 125g Mix Blender (Speed 1) 60 seconds
and vinegar. Then add the oil and Food Processor
(button 1)
Whipped cream Add sugar or vanilla 200ml Mix Blender (Speed 1) 60 seconds
if desired and Food Processor
(button 1)
Peppercorns Whole 100g Grind Food Processor 20-30 seconds
(button 5)
Cinnamon sticks Halve 30g Grind Food Processor 20-30 seconds
(button 5)
Fresh ginger Peel, cut into 100g Chop Food Processor 20-30 seconds
1.5cm pieces (button 2)
Carrots, Arrange foods vertically in the 300g Slicing disc Food 20-30 seconds
zucchini, feed chute, cutting them so (button 3)
eggplant they are even in height.
For slices arrange foods
horizontally in the feed chute.
Process by exerting form
pressure on the food pusher.
Mushrooms Wipe the mushrooms and 200g Slicing disc Food 20-30 seconds
pack in the feed chute on Processor (button 3)
their sides. Process using light
pressure on the food pusher
Cheese Cut the cheese into piece large 120g Slicing\shredding disc 20- 30 seconds
enough to just fit the feed chute. Food Processor
Process using light pressure on (button 3)
the food pusher to prevent
cheese crumbling
17
Problem Solution
Motor doesn’t start or blade doesn’t rotate Check that the blender jug or processing bowl and lid
are securely locked into position.
Check the Stop ready light is illuminated.
Check that the power plug is securely inserted into
the power outlet and switched ON
Be sure to press only one function control button
at a time
Food is unevenly chopped Either too much food is being chopped at one time or
the pieces are not small enough. Try cutting food into
smaller pieces of even size and processing a smaller
amount per batch. For best results the food should be
chopped into pieces no larger than 2cm
Food is chopped too fine or is watery The food is over processed. Use brief pulses or process
for a shorter time.
Food collects on processing bowl cover or side of bowl Processing too much food. Turn the Food processor off.
When the blade stops rotating, remove the cover and
clean the bowl and cover with a spatula. Reduce
quantity of food to be processed
Food sticks to blade Processing too much food. Turn the Food processor off.
When the blade stops rotating, remove the cover.
Carefully remove the blade. Remove the food from the
blade with a spatula, reduce quantity of food and
continue processing.
Recommended foods, quantities and function
16
Trouble Shooting Chart
Food Processor Bowl Capacity
Item Capacity
Onion 300g
Meat 300g
Cheese 200g
Fish 300g
Pumpkin 300g
Eggs 4 x 60g eggs
Prawns 300g