Filter
Top Products
PRE-PROGRAMMED DOSE– DOUBLE CUP
NOTE: Pressing the one cup or two cup
buttons during a programmed
espresso will immediately stop the
pour.
PROGRAMMING SINGLE ESPRESSO
Prepare to make a single cup of espresso
by following steps 2 to 6 in ‘A MINUTE TO
LEARN’ on pages
30-31
Place your cup underneath the group head.
To begin programming, press the
‘PROGRAM’ button once. The machine will
beep once and the program button will begin
to flash. This indicates the machine is in
programming mode.
Press the one cup
button once. The
machine will commence normal pour
function, and the one cup button surround
will begin to flash.
When the desired amount of espresso has
poured into the cup, press the one cup
button to stop the pour. The machine
will beep twice, indicating it has saved
your measured pour quantity and exited
programming mode.
1.
2.
3.
4.
5.
PROGRAMMING DOUBLE ESPRESSO
Prepare to make a two cup of espresso
by following steps 2 to 6 in ‘A MINUTE TO
LEARN’ on pages
30-31
Place your cup underneath the group head.
To begin programming, press the
‘PROGRAM’ button once. The machine will
beep once and the program button will begin
to flash. This indicates the machine is in
programming mode.
Press the two cup
button once.
The machine will commence normal pour
function, and the two cup button surround
will begin to flash.
When the desired amount of espresso has
poured into the cup, press the two cup
button to stop the pour. The machine
will beep twice, indicating it has saved and
exited programming mode.
1.
2.
3.
4.
5.
Press the two cup
button once. A preset
dose of approx 60mls will be delivered. A
pumping noise will be heard in this operation.
The machine will automatically stop once the
preset pour has been delivered.
A LIFETIME OF EXPERIMENTATION (continued)
39