Filter
Top Products
PROBLEM POSSIBLE CAUSES WHAT TO DO
Grinder does not start when micro
switch is pressed.
‘Dose’ lights are cycling through
single and double.
Bean Hopper safety interlock is open (hopper
is not correctly in place)
Remove hopper, check for any then debris replace the
hopper into the correct location
Too much/too little ground coffee is
being delivered to the filter basket
Grind dose settings are incorrect for particular
grind size
Use the dose adjust dial to increase or decrease the
grind dose.
Too much/too little espresso is being
delivered to the cup
Grind dose settings and or grind size require
changing
Reset the machine to defaults or re-program new coffee
dose settings
TROUBLE SHOOTING GUIDE (continued)
55