Filter
Top Products
8
Three layer cooking:
Insert steamer basket
(–) into position on top
of the drip tray
Place the food into steamer basket
(–)
Insert steamer basket
(=) into position on top
of steamer basket (–)
Place second layer of food into steamer
basket
(=)
Insert steamer basket
( ) into position on top
of steamer basket (=)
Place third layer of food steamer basket
( )
Cover with lid
Always use the drip tray when steaming.
Step 5
Insert power plug into a 230/240v power outlet
and switch on.
Steaming Function
To select a Steaming function, press set once.
The steamer is already preset to steam for 20
minutes:
To begin steaming:
Press POWER button on control panel and LCD
screen will show the time as 00:00.
Press SET button once on control panel and LCD
screen time changes to 00:20 with STEAMER
flashing in top right hand corner.
After approx 10 seconds, the word STEAMER
stops flashing, the timer colon starts flashing
and the red light above power button illuminates,
hence heating commences and the time starts
counting down in 1 minute increments. Steaming
commences within 30 seconds and will continue
for 20 minutes.
•
•
•
•
•
•
•
1.
2.
3.
To adjust steaming time
Press POWER button on control panel and LCD
screen will show the time as 00:00.
Press SET button once on control panel and LCD
screen time changes to 00:20 with STEAMER
flashing in top right hand corner.
Immediately press the HOURS or MIN button
and continue pressing until the required time is
reached. Steaming can be set from 1 minute to
1 hour and 59 minutes.
After approx 10 seconds, the word STEAMER
stops flashing, the timer colon starts flashing
and the red light above power button illuminates,
hence heating commences and the time starts
counting down in 1 minute increments. Steaming
commences within 30 seconds and will continue
for 20 minutes.
If a lesser time than 20 min is desired, continue
pressing the MIN button until the timer reverts to
00:00 then continue until desired time is reached.
Keep Warm Setting
At the end of steaming, five beeps will sound
and the time on the LCD screen shows 00:00
with KEEP WARM written underneath. The
time on the LCD screen will then start to count
up in 1-minute increments (for up to 1 hour).
The food steamer will cycle on and off during
this time to maintain an even temperature.
However, it is not recommended to use Keep
Warm for extended periods of time as food will
deteriorate.
Preset Timer
To select the Preset Timer function together
with a Steaming function as described, press
the SET button on the control panel twice and
the LCD screen time will change to 00:00
with TIMER flashing in top left-hand corner.
Immediately press the HOURS and/or MIN
button and continue pressing until the required
time is reached. The preset time can be set
from 1 minute to 12 hours and 59 minutes.
1.
2.
3.
4.
Operating your Breville Avance
®
HealthSmart
®
Steamer
continued
(–)
(=)
( )