Breville BLR50 Blender User Manual


  Open as PDF
of 24
 
7
Know Your Breville Power Blender
Before first use
Removeandsafelydiscardanypackagingmaterialand
promotionallabels.
Disassembletheblenderjugbyfollowingthestepsinthe
‘Disassemblingtheblender’sectionbelow.Washthelid,
innerlid,blenderjug,siliconseal,blenderjugbaseand
bladeassemblyinwarm,soapywaterwithasoftcloth.
Rinseanddrythoroughly.
Wipe the motor base with a damp cloth and dry
thoroughly.
Disassembling the blender
1. Placethemotorbaseonaat,drysurfacesuchas
abenchtop.Ensurethatthespeedselectiondialis
intheoff‘0’position,theapplianceisswitchedoffat
thepoweroutletandthepowercordisunplugged.
2. Remove the blender jug from the motor base by
holding the motor base rmly and grasping the
blenderjughandle andpullingtheblenderjugup
andoffthemotorbase.
Operating Your Breville Power Blender
3. Removethelidandinnermeasuringcupfromthe
blenderjug.
4. Placethejugupsidedownonaat,drysurfacesuch
asabenchtop.
5. Holdthejughandleandturntheblenderjugbase
anti-clockwise to remove. Carefully lift the blade
assemblyoutofthenarrowendoftheblenderjug.
Removethesiliconsealfromoutsidethenarrowend
oftheblenderjug.
6. Blade assembly – easily removable for cleaning
7. Blender jug base
8. Motor base
NOTE
The blending blades are extremely sharp. Avoid any
contact with fingers and hands.
BLR50_IB_Issue1,10_FA.indd 7 9/12/09 2:56 PM
 previous next