Filter
Top Products
12
ASSEMBLY & OPERATION
1. Detach the chopping bowl and lid (refer
to instructions). Remove the lid from
the chopper bowl. Carefully remove the
chopping blade and use a spatula to
scrape off any attached food back into
chopping bowl. Use a spatula to remove
food from the chopping bowl.
TO DETACH THE CHOPPING
BOWL AND LID
Ensure the switch is released, power is
turned off at power point and the appliance
is unplugged.
Hold the motor body with one hand, and,
using thumb and finger of the other hand,
press on the two EJECT buttons on either
side of the motor body. Pull the motor body
away from the chopper bowl lid to detach.
RECOMMENDATIONS WHEN USING
THE STICK MIXER WITH THE
CHOPPING BOWL
• Do not operate the stick mixer when the
chopping bowl is empty.
• The anti-slip mat keeps the chopping
bowl stable, however it is recommended
during processing to hold the motor
body with one hand and the chopping
bowl and lid with the other.
• When processing, cut food into uniform
sizes to ensure quicker, even and more
consistent results.
• DO NOT process hard foods such as
coffee, cereal or chocolate in lumps, as
damage to the blade may result.
• DO NOT process boiling or hot foods in
the chopping bowl.
• NEVER remove the blade from the bowl
before food processing is completed.
• The stick mixer blends foods and
liquids rapidly, therefore it is easy to
over process. Remember to check food
throughout the operation.