Filter
Top Products
5.5 OPERATING C12 / CM CONTROL
5.5.1 C12 / CM CONTROL DESCRIPTION
5.5.2 USING C12 / CM CONTROL
• OFF: To stop the unit, slide the button on this position.
• N
ORMAL: For a day-to-day usage, slide the button on this position. The
unit then will operate on normal speed.
• B
OOST: For a high speed operation, slide the button on this position.
Generally used when extreme conditions occur, eg.: parties,
smokers, etc.
5. CONTROLS (CONT’D)
- 32 -
VC0054
OFF:
U
NIT IS OFF.
POWER INDICATOR:
LIGHTS UP WHEN SLIDE SWITCH
IS ON
NORMAL OR BOOST
POSITION.
FILTER MAINTENANCE
INDICATOR
:
FLASHES EVERY MINUTE TO
INDICATE IT IS ON DUTY.
FLASHES EVERY SECOND WHEN
ITS TIME TO REPLACE
PREFILTER
.SEE BIANNUAL
MAINTENANCE IN SECTION 6.
LIGHTS UP WHEN ITS TIME TO
REPLACE FILTER AND
PREFILTER.SEE ANNUAL
MAINTENANCE IN SECTION 6.
NORMAL:
UNIT IS OPERATING ON
NORMAL SPEED.
BOOST:
UNIT IS OPERATING ON
HIGH SPEED.
RESET FILTER HOLE:
ONCE THE MAINTENANCE DONE, RESET THE FILTER
MAINTENANCE INDICATOR BY CAREFULLY INSERTING
A SMALL ROD
(EG: PAPER CLIP) IN THE RESET FILTER
HOLE, DURING 1 SECOND.THE FILTER MAINTENANCE
INDICATOR WILL TURN OFF.